Can you read the screen when the computer boots up after reseating video card?
Action:
WARNING: Electrical shock hazard! Make sure the power is turned off and the external power cables have been disconnected before removing the computer cover.
CAUTION 1: This task should be performed by a qualified computer technician.
CAUTION 2: Please observe steps to reduce the potential damage to computer components from electro-static discharge.
CAUTION 3: Turn off and unplug the computer before removing the computer cover.
1) Disconnect the monitor cable from the video.
2) Remove the screw that attaches the video card to the case.
3) With both hands, gently lift the video card from the expansion slot.
4) Carefully align the card edge connector with the expansion slot and press down firmly.
NOTE: Make sure the card is sitting level in the expansion slot.
5) Replace the screw attaching the video card to the case.
6) Replace the computer cover and reconnect the power cable.
7) Connect the monitor to video card and turn on the power to the monitor and computer.
Question:
Can you read the screen when the computer boots up after reseating video card?
Responses:
Yes, can read the screen
No, cannot read the screen
